If you are using Static IP on the server Ultim8e Deployer is hosted then you should allow the IP address of that server.
If you are using Dynamic IP on the server Ultim8e Deployer is hosted then you should allow the IP range as below:
- 192.168.208.0/25 (192.168.208.0 – 192.168.208.127)
- 192.168.211.0/24 (192.168.211.0 – 192.168.211.255)
For deployments to work correctly you should also ensure that the correct ports are open on your firewall. These vary by protocol:
- Passive FTP – ports 20, 21 and all ports higher than 1023
- Active FTP – port 21
- SSH/SFTP – port 22
These IP ranges are used to host all of our applications by Ultim8e Deployer.